免费网站aaa,国产性自拍,日韩性交A片,91网站在线看,日本无码AA级毛片

The structure and properties of cladding machine introduction

Now on the market structure of multi cladding machine variety, have completely by hand operation, simple structure, small occupation area of the machine, glue drying speed is slow, the production efficiency is low, the price is cheap, ordinary veneer machine small machinery factory can produce, this machine needs at least 3 person operation, the one will corrugated cardboard into glue wheel and the rolling wheel, and then by 2 people across the common paper raised alignment mounted after gluing of corrugated board, the process is generally suitable for small batch production and quality grades are not high pre printed carton

Semi automatic cladding machine is composed of 2 people at the same time respectively, conveyor of corrugated cardboard and paper to the positioning system, after rolling into the conveyor belt, transmission belt in the pressure under the pressure to achieve uniform mounting, has the advantages of firm adhesion, easy blistering and degumming, the machine speed can be adjusted by hand, but the speed put paper operating speed limit, it is difficult to achieve high-speed mounting production

High speed automatic cladding machine paper and corrugated cardboard are vacuum adsorption automatic paper feeding, automatic transmission, at the back of the pressure belt conveyor belt and almost and semi automatic machine, as the machine speed, quick drying adhesive should be used, the machine has the advantages of high production efficiency, good quality of collage. Is suitable for paper materials hard, high-grade pre printed carton production

How to choose the specification covering machine

Cladding machine specification is relative to the length of the roller is concerned, the roller long cladding machine can be mounted paste board width is relatively large, the purchase of cladding machine specification should be determined according to the characteristics of plant products, some factories to a narrow range of products, in order to make the machine can also be mounted high specifications of products, all buy the specifications of the machine for production, that the purchase of large size machine "can be big or small" adaptability is strong, in fact, used for large-size machinery to mount a small size, small batch products, hand easily cause adhesive waste, on the other hand, the energy consumption, the production cost is also high, therefore, the structure of products comparison of diverse plant, in the purchase of cladding machine specifications, shall be at the discretion of the appropriate proportion of the purchase of cladding machine according to different specifications, to meet the reasonable requirements of the production efficiency.